J&A LENOX GS Pedicure Glass Bowl/Stand
Another option found in the Lenox Collection of Pedicure Chairs from J&A is the Lenox GS Pedicure Bowl Stand. Perfect for modern nail salons and luxury spas, the pedicure stand is fashioned to be a permanent fixture, not portable. A pre-installed discharge pump is included. Elegantly wrapped in a filigree vine pattern, the metal base allows the luster of the glass of the large, 4.5-gallon, Hard Roc Glass Bowl (Borosilicate) to shine through. Choose from Bronze or Nickel for the base and Black Nickel, Crystal Reflections or Gold Champagne for the pedicure bowl. The Lenox GS Glass Bowl is crack, stain and scratch resistant.
Controls and mechanical components of the system are designed to complement the entire product and placed for ease of usage and maintenance. These include a dual-function spray shower head in satin chrome finish, single-hand faucet for hot/cold water control, Whirlpool jet on/off switch and discharge pump control.
Lenox GS Pedicure Bowl Stand comes with the Magna Jet pipeless Whirlpool jet, a durable, trusty pedicure jet. Magnet Jet is an available upgrade that gives you the option of using industry standard sanitary liners in the pedicure sink. The footrest is removable.
- Manufactured by an industry leader, J&A, this pedicure spa glass bowl and stand are crack, scratch and stain resistant
- Pre-installed discharge pump included
- Elegant and durable 4.5-Gallon Hard Roc Glass Bowl (Borosilicate) in Black Nickel, Champagne Gold, Crystal Reflections
- Single-hand faucet with dual-function shower head sprayer in satin chrome finish
- Made in the USA
Warranty: One-year parts & labor, two-years parts
LEAD TIME: 14-21 days
Dimensions: 23"L x 23"W x 15"H
Weight: 125 lbs
Power source: 110V / 60HZ / 15Amp with dedicated outlet
Electrical switches: On/Off Air Activated Switch.
Whirlpool Pump Motor: 120 VAC 60HZ; 1.2A; 55W Single Drive with Dual Whirlpool
Discharge Pump Motor: 110V 5.5 AMP 60HZ
Water Fill Line Capacity: 4.5 U.S. gallons (17 Liters)
Hot and cold water supply lines required. Half inch fittings
Drain Connection: P-Trap Pre-installed with 1.5” PVC Pipe
Compliance with following Code (s): Uniform Plumbing Code, National Plumbing Code of Canada and international Plumbing Code. Also, Compliance with following Standard (s): ASME A112.18.3M / A112.18.1M, CSA B125, NSF / ANSI 61
ANSI - American National Institute, ASME - American Society of Mechanical Engineers, CSA - Canadian Standard Association IAPMO - International Association of Plumbing and Mechanical Officials, UL - Underwriters Laboratory
All J&A USA products has been compliance with requirements for Whirlpool bath appliances contained in ASME / ANSI A122.19.7M-1995, CSA C22.2 No. 68-69
- Is Free Shipping Product?